Previous Article

How to Change Watch Batteries at Home

Next Article

How to Save Money on Watch Batteries and Replacement

How to Replace Watch Batteries

After a while, you may notice that your wrist watch is slowing down. Or one day it may just stop working. You can spend money to take it to a watch repairer, or you can replace the watch battery on your own. The second option is fast, inexpensive and easy to do. Changing the watch batteries on your own can be done if you have the right tools and follow the correct steps.


  • Turn your watch over and remove the cover. Most watch covers snap on and can be removed easily using a flat screwdriver or a knife. Insert the flat blade into the grove between the cover and the back of the watch and pry it off. Other covers are screwed on and can be unscrewed using a small screwdriver.

  • Remove the rubber gasket. Most watches will have a rubber gasket that surrounds the edge of the cover. Remove it carefully and set it on the side until you reassemble the watch.

  • Find and remove the battery. The watch battery is small and round, and may resemble a pill. To remove it you will have to either take off the battery cover or a battery clip. Some watches have a cover with a screw that you can remove using a small screwdriver. Others have a spring type clip over the battery that you will have to pry the battery out from underneath.

  • Buy a new battery. Watch batteries vary in size so you will need to buy one that fits your watch. The battery will have numbers on the back which are normally three or four numbers. Make a note of the numbers before going to the store to buy a new battery. You may want to bring the old battery so that you can compare to make sure you are purchasing the correct one.

  • Install your new watch battery. The battery should have one side that has a plus symbol on it, which is the positive side. If the old battery had the positive side facing up, make sure you place the new battery in with the positive side facing up as well. Replace the battery cover or clip.

  • Test your watch to make sure that it works. Take a second to see if the second and minute hands are moving, or if the digital display changes.

  • Replace the rubber gasket and the watch cover in the same way that you removed them. Take caution not to cause damage to the gasket or the cover. If your cover popped off, it should pop back into place.