Previous Article

How Does the Electric Company Determine How Much Power is Used?

Next Article

How to Troubleshoot a General Electric Company Refrigerator

How to Replace a Service Wire to the Electric Company Feed

There are many reasons which would call for replacing the electric companies service wire that connects to your electrical service panel. The panel could have shorted out and need replacing. The house could have been damaged in a storm or any other number of things. Learn how to complete the replacement without the help of a professional. 

The following items will be needed:



  • Multimeter

  • Socket set

  • Screwdriver set

  • Personal electrical safety equipment

  • Replacement service cable wire.

    1. Open your main service panel (breaker box). Set the main breaker to the “open” or “off” setting.

    2. Use your Multimeter to check that there is not any current in any of the wires.

    3. Find the two bolts (could be large screws) that will be holding the service wire in position in the breaker box (service panel). Most often that location will be the top of the panel (box).

    4. Use a socket or a screwdriver and loosen the bolts or screws holding down the service wire.

    5. Contact your utility provider and have them open the electric meter outside the house. It is illegal in most instances to open a meter without the utility’s permission and they most generally prefer to do it themselves. They usually have tamper proof seals as well.

    6. Pull the service wire through the walls to the outside. Connect the new wiring to the electric meter and run it back into the house by the shortest way possible to the electrical circuit box (or service panel).

    7. Reconnect the new service wire to the panel (or box) the reverse of the way you took it out. Make sure everything is tightened down and move the main breaker switch back to the “on” or “closed” position. Your power will then be back on.