How to Troubleshoot a General Electric Company Refrigerator
General Electric is one of the most reliable and affordable refrigerator brands on the market today. As with any commercially available home refrigerator, sometimes a General Electric refrigerator may experience common problems. These problems are very easy to troubleshoot and fix yourself, without spending money on a repair company.
Refrigerator is not running
- Pull the refrigerator away from the wall and verify that the plug is pushed all the way into the wall socket.
- Verify that your fridge's temperature control has been switched to on.
Cool, but not cold
There are a variety of factors that can cause a fridge to not run cold.
- Check the temperature controls and lower the temperature.
- Review how food is loaded by equally distributing food in the fridge and freezer.
- Make sure that food is not blocking the cold air from blowing inside of the fridge.
- Pull your refrigerator away from the wall and see if the condenser coil is dirty. Before cleaning the coil, you will need to turn the fridge off.
- Remove any excess ice buildup in your freezer.
- Check the seals on your refrigerator and freezer doors. Sometimes, these seals can decay over time and need to be replaced.
- Verify that there is a small gap between your refrigerator and the wall.
Doesn’t turn off
There are occasions when it may seem like a refrigerator never turns off. Condensers tend to run longer during the summer months, because it may be hotter in your house. During cooler months, you can troubleshoot this problem easily by doing the following:
- Make sure that the refrigerator's light turns off when the door is closed.
- Verify that the door is closing all the way after someone removes or adds something to the fridge.
- Remove your refrigerator from the wall and make sure that the vent isn’t full of dust, dirt or debris that could be blocking its airflow.