Previous Article

How To Replace a Spa Jet

Next Article

How to Replace a Subfloor

How to Replace a Starter Rope Lawn Mower

The starter rope on a lawn mower can break at any time. The most common cause of breakage is wear and tear. Any type of repair that needs to be made can be expensive, but repairing a starter rope is not one of them. In fact, it is something that you can easily do.

How to Replace a Starter Rope Lawn Mower




  1. Use a screwdriver to loosen the screws holding the rope housing in place.


  2. You will see a metal wheel once the housing is off. Use a wrench to remove the bolt holding the wheel in place.


  3. Pull the wheel off and the winding spring, which coils the rope, will come off with it.


  4. Pull the rope off the wheel. You may need a knife to cut the knot.


  5. Securely tie the new rope to the wheel and wrap it around several times.


  6. Place the wheel back onto the mower and replace the bolt.


  7. Pull the end of the rope through the hole in the housing.


  8. Attach the pull handle from the old rope to the end of the new rope.


  9. Reattach the housing and tighten the screws.