Previous Article

How to Restore Leather Auto Seats

Next Article

How to Restore Old Clothing Wardrobes

How to Restore Lumber From Old Barns

The best way to save money when it comes to lumber is to use old lumber from places such as old barns. The barn can be taken down and the wood can be used for different types of projects around the home. Even if the wood from the barns seems like it cannot be salvaged, there are ways to restore it and make it reusable again.

How to Restore Lumber From Old Barns


Materials Needed



  • Plastic covering

  • Power washer

  • Insecticide for wood

  • Hammer or pry bar

  • Planer



  1. Inspect the wood to see if there is any mold or rot on the pieces. Throw those pieces away. You should only use the wood that is of good quality because the damaged pieces can compromise a building or be unsuitable for other projects.

  2. Place a plastic covering on the ground and place the wood pieces on top of it. You want to avoid getting any dirt or mud on it. Use a power washer to spray the lumber. This will remove any dirt, debris or paint. Make sure the nozzle is close to the lumber when you are using it.

  3. Spray an insecticide over the wood. The insecticide should be specifically for wood. It will kill pests that live in or on the wood. Allow the wood to dry for 48 hours.

  4. Examine the wood to see if there are any nails or screws in it. You can remove those with a pry bar or a hammer. Use a metal detector to locate any other metal objects that you may have missed.

  5. Use a planer to mill the wood. Milling will make the wood even when it comes to thickness and makes other defects stand out. Look over the wood once again after milling. Look for signs of damage such as rot, mold or insect infestations. You will have to discard the lumber if you find that it is damaged.