How to Reupholster a Metal Bar Stool
Barstools endure so much wear and tear that the seats may need to be reupholstered to fix them up some. Metal bar stool seats, especially can get ragged easily and be in need of a fabric replacement. You can make metal bar stools look brand new by reupholstering them.
Materials Needed:
- Flat-head screwdriver
- Batting
- Foam padding
- Fabric
- Cardboard
- Pencil
- Utility knife
- Staple gun
- Turn the stool over upside-down. Use a screw driver to unscrew the screw that attaches the seat pad to the seat. Lift the stool and let it set in its upright position and lift the seat pad from of the legs of the stool.
- Remove the pins from the seat that are holding the upholstery in place. Pry the pins from the seat by sliding a flat-head screwdriver underneath the pins and lift up. Repeat this process to remove all the pins.
- Remove the old fabric from the seat, and then examine the batting and seat pad. Leave the batting and seat pad on the seat if they are still in good shape, otherwise take them off.
- Create a template for the new padding. Put the old seat pad on a piece of cardboard and use a pencil to trace around it. Cut out the cardboard to create a template. Place the template on top of the new foam padding and trace an outline on the foam. Use a utility knife to cut the padding.
- Spread out the new fabric and batting face-down on a table. Trim out the fabric and batting so they are four inches bigger than size of the foam pad. Place the foam padding on top of the fabric and the batting and put the seat face-down on top of the padding.
- Fold the fabric up, over, and all the away around the seat pad. Eliminate any wrinkles by smoothing the sides. Tightly hold the fabric in place and secure it around the seat using a staple gun. Trim away any access fabric to make it look nice and neat, and then reattach the newly covered seat pad to the bar stools.