How to Sand a Car for Auto Painting
Sanding a car is important if you want the paint job to look good. The surface will look and feel great when the area is prepared. Sanding removes areas that are uneven or have sags. The task is very easy to do and there are only a few tools you will need. Most people complete the sanding within two or three hours.
How to Sand a car for Auto Painting
Materials Needed
- Water
- Garden hose
- 1000 grit sandpaper
- 1500 grit sandpaper
- 2000 grit sandpaper
- Sanding block
- Rubbing compound
- Silicone free glaze
1. Spray the entire car with water from a garden hose. This will wet the surface and remove any dirt and debris.
2. Dip 1000 grit sandpaper in water and apply it over a sanding block.
3. Lightly sand over the areas on the car that are not level or smooth. Remove the 1000 grit sandpaper from the sanding block.
4. Make sure you do not sand on the edges or contours of the car. Use very light pressure if you do come in contact with those areas.
5. Dip 1500 grit sandpaper in water and apply it over the sanding block.
6. Lightly sand over the areas on the car. Remove the 1500 grit sandpaper.
7. Repeat Step 4 but use 2000 grit sandpaper. Sand the surface of the car.
8. Apply a rubbing compound to the surface of the car. Follow the directions on the package for application instructions. The rubbing compound will flatten any paint that was missed during the sanding. Make sure you work the rubbing compound in well.
9. Apply silicone free glaze to the car. You must follow the directions on the package exactly.