How to Sandblast Grave Markers
Grave markers are the parts of the grave that is the head. It contains the name, dates and other memorial etchings. They make the grave easier to find when you go to visit. Sometimes they can become dirty but sandblasting will help clean them.
Materials Needed
- Gloves
- Mask
- Protective clothing
- Walnut shells
- Pumice
- Sandblaster
- Make sure you wear gloves to protect your hands from flying debris. You should also wear a mask so you do not inhale some of the debris. Long clothing is also helpful to protect your skin and body.
- Use walnut shells and pumice inside the sandblaster for the best results. You want to avoid using harsh materials that can damage the etching and make permanent markings on the grave marker. You will not use both materials at the same time.
- Open the sandblaster and place the walnut shells inside the appropriate reservoir. Turn the sandblaster to the lowest setting possible. A higher setting will damage the grave marker.
- Turn on the sandblaster and blast the grave marker from side to side. You should start at the top of the marker and move down for the best results. Make sure you are at a close distance to the marker.
- Turn off the sandblaster and add pumice inside the sandblaster. Make sure it is still set on a low setting. Turn on the sandblaster and sandblast the marker from side to side starting at the top and working your way to the bottom.