Previous Article

How to Buy Professional Laundry Systems

Next Article

How to Sell Commercial Laundry Systems

How to Service Commercial Laundry Systems

Commercial laundry systems get used far more often than those found within the home. As a result of their frequent use, they often time will require more frequent service. If your commercial laundry system is not operating correctly, there are a few simple short tips that can help you repair them quickly.


  1. Ensure that the power cord is properly connected if you are having trouble with the unit operating correctly. Often time the culprit is an issue with the power cord. Look in the rear of the commercial laundry machine and ensure that both the hot and cold faucets are both turned on. If you are servicing a washing machine be sure that the fill hoses aren't kinked. Also, if it is a washing machine ensure that the timing knob is pulled out, if applicable.

  2. Press and hold down the start button on the machine for a full two seconds to see if the system starts, if the machine has a start button.

  3. Ensure that the lid is completely closed if you are having trouble with the machine starting. Most commercial laundry equipment will have a motor overload protector. Allow a few minutes to pass to see if the machine will reset itself.

  4. Ensure that the drain hose has not kinked, as mentioned before, if the washing machine will not drain. Also look in the drain receptacle for any signs of clogging.

  5. Check the front door of the laundry machine and ensure that it is completely closed. If the door is not closed the machine will not start.