Previous Article

How to Snake a Clogged Kitchen Sink

Next Article

How to Snake a Drain Pipe

How to Snake a Clogged Tub Drain

If your tub is clogged you can easily clear the debris that is causing your plumbing problems using a plumbing snake which is also commonly known as a snake auger. These plumbing tools can be purchased at your local home improvement store. A plumbing auger comes in a manual or electric model and will vary in price depending on the type that you chose to purchase.


  1. Purchase a snake auger, also known as a plumbing auger, from your local home improvement store. If you do not want to purchase one, most home improvement stores have them to rent as well.

  2. Remove the drain cap from your bathtub drain using a standard Philips or flat head screwdriver depending on the type of screw that is used in your drain cover.

  3. Put on rubber gloves and remove any hair or other debris that you can reach with your fingers. You may also want to use a long object such as a fork to reach further down into the drain to remove the hair and debris that is within reach.

  4. Place the curved end of your metal rod into the open end of your bathtub drain. Feed it through until it reaches the source of your blockage. Once you have reached this point you will no longer be able to feed it through any further.

  5. Crank the handle of the snake auger in a clockwise motion, which will cause the snake to turn and apply force to the source of the blockage in your drain.

  6. Shake the handle of the snake auger around to further loosen any remaining debris that could be lodged on the walls of your bathtub drainage pipe.

  7. Crank the handle of the snake auger in a counter-clockwise motion to remove the snake auger from your drain.

  8. Run the water in your bathtub to see if the drain has been cleared of all blockages. If it is still running slowly you may need to repeat steps four through seven until your drain is completely free and clear of all debris and the plumbing is able flow through easily.