How to Strip Paint Off of Wrought Iron Railing

Wrought iron railings are common around many homes because of the elegance and beauty it adds to the property as well as the home. The railings have been known to last a long time but can become dull after some time. The railings can be restored but the paint must be stripped beforehand.

How to Strip Paint Off of Wrought Iron Railing

Materials Needed

• Gloves


• Mask


• Drop cloth


• Pressure washer


• Chemical paint stripper


• Cloth


• Bucket


• Water


• Liquid dish soap


• Scrub brush

1. Make sure you wear gloves and a mask to protect the body from the paint. The paint could contain lead so it is a good idea to be on the safe side with the protective gear.


2. Protect the vegetation or sidewalk under the fence. Cover those items with a drop cloth so the chemicals or paint droppings will not harm them.


3. Spray the railings with a pressure washer. Make sure all areas are covered. This will remove any loose paint and make the rest of the cleaning process a little easier.


4. Apply chemical paint stripper on a cloth. Wipe the railings with the stripper until it is completely covered.  Pour more of the paint stripper on the cloth as needed. Allow the chemical stripper to sit on the wrought iron railings for 10 minutes before proceeding to the next step.


5. Fill a bucket with 1 gallon of water and add ¼ cup of liquid dish soap. Use the cleaning solution and a scrub brush to thoroughly clean the railings. Rinse the railings with clean water and allow them to completely dry.