Previous Article

How to Set Up Boat Slip Lines

Next Article

How to Buy an Umbrella Insurance Policy

How to Tie a Boat to a Boat Slip

A boat slip is a ramp on the dock to which a boat may be tied. The procedure for tying a boat to a slip depends on the weather conditions and the size of the boat. The simplest of these methods uses three mooring lines and is for a small sailboat in calm water.


  1. Tie the bow line using the mooring line that is attached to the forward-most cleat on your boat. Place the eye of this mooring line over the forward horn of a cleat that is forward of the boat cleat to which the mooring line is attached. Pull the line taut and weave the line into a figure eight pattern over and under the horns of the cleat. Make at least two complete figure eight patterns with the mooring line. The bow line will prevent your boat from moving backwards in the slip.

  2. Tie the stern line using the mooring line that is attached to the stern-most cleat on your boat. Place the eye of this mooring line over the stern horn of a cleat that is aft of the boat cleat to which the mooring line is attached. Pull the line taut and weave the line into a figure eight pattern over and under the horns of the cleat. Make at least two complete figure eight patterns with the mooring line. The stern line will prevent your boat from moving forward in the slip.

  3. Tie the breast line using the mooring line that is attached to a cleat in the middle of your boat. Place the eye of this mooring line over one of the horns of the cleat that is nearest the boat cleat to which the mooring line is attached. Pull the line taut and weave the line into a figure eight pattern over and under the horns of the cleat. Make at least two complete figure eight patterns with the mooring line. The breast line will prevent your boat from moving away from the dock.