Previous Article

How to Gauge Wind Speed When Sailing

Next Article

Types of Personalized Gifts for Businesses

How to Wrap a Winch When Sailing

A winch is a mechanical device consisting of a spindle and a crank. A sailor winds line from the sail around the winch, which is then used to change the position of the sail. The proper technique for wrapping a winch is essential for obtaining the maximum speed from the sailboat.

Items Needed:



  • Sailing Gloves



  1. Wear sailing gloves to protect your hands from friction burns while handling the sailing lines, also known as sheets.

  2. Rig the sheet from the movable corner of the sail when the sail does not have a load on it. The sheet should run directly from the pulley, or block, to the winch. The sheet should not rub against anything because this will damage the sheet when you turn the winch.

  3. Pass the entire length of the sheet through your hands to remove any kinks or twists in the sheet.

  4. Pull the sheet taut, and wrap it clockwise around the spindle of the winch, using large circular motions with your hands. Ensure you keep your hand over the winch to avoid wrapping the sheet over your fingers. Do not allow the turns to overlap each other or to develop knots.

  5. Pull the sheet after you make each turn to ensure it is gripping the winch.

  6. Continue wrapping the sheet until you have three full turns around the winch. Pull the free end of the sheet taut, and place it snugly over the turns on the winch. The sheets should place enough tension on the winch to keep from slipping when the winch is turned.