Previous Article

How to Skate With Quad Roller Skates

Next Article

How to Tile a Floor With Slate

How to Tile a Floor Using Tile Baseboard

Tiling a floor will provide many extra benefits than traditional carpet. Most people like the look of tile floors better than carpet and they are also a lot easier to clean. The cost of installing tile floors is what turns most people away. Save yourself some money by tiling your own floors.

Things You'll Need:



  • Tape Measure

  • Pencil

  • Paper

  • Tile

  • Chalk Line

  • Tile Glue

  • Level



  1. Measure the dimensions of your floor. Make sure you right down exact measurements so you purchase the right amount of tile.

  2. Purchase the tile at a local home care store. A representative should be at the store to help you pick out the right color scheme and the proper amount of tile based on your measurements. They should also be able to help you purchase all the necessary supplies and tools.

  3. Mark your floor into four equal sections with a chalk line. Use chalk because it will be a lot easier to erase if you make a mistake.

  4. Mix the tile glue that you purchased at the home care store and start applying it to the ground. Start at the center and apply enough for four tiles, one in each quadrant. Make sure to only mix enough glue for a few tiles at a time.

  5. Lay the tiles over the glue and use a level to make sure they are straight. Continue the process until you have covered the entire floor. You'll probably need to start cutting tiles in different sizes when you reach the end. 

  6. Allow the tiles to settle at least one day to dry before walking on your new floor.