How to Use Baking Soda as a Drain Cleaner
Using baking soda as a drain cleaner offers several benefits. Along with being inexpensive, this product is much kinder to your drainpipes than harsh cleansers and leaves behind a fresh scent. When used properly, a combination of hot water, baking soda and white vinegar used on a regular basis will remove stubborn materials that lead to clogs and save you a lot of time and trouble.
Baking soda is one of the most versatile products for use around the house. Along with keeping the refrigerator fresh smelling, improving the taste and quality of baked goods and working with detergents to make the laundry a little cleaner, this product can also do wonders for your kitchen and bathroom drains. When combined with a couple of other ingredients, baking soda as a drain cleaner is effective, inexpensive and very kind to your plumbing.
- Measure out 3/4 to one cup of dry baking soda. Carefully pour the entire amount into the open drain, allowing the soda to set in the drain for a moment or two.
- Add some white vinegar. Measure out roughly a half-cup of white vinegar and pour into the open drain. Immediately cover the drain opening with a plug or any other device that will trap the two ingredients in the drainpipe. Since the combination of baking soda and white vinegar will begin to bubble immediately, be prepared to cover the drain as soon as the vinegar is poured into the pipe.
- Allow the soda and vinegar mixture to remain in the drain for at least a half hour. This allows the two ingredients time to gently dislodge any materials that have collected in the drain and ease the potential for clogs.
- Boil some water. Just before the half hour is completed, place some tap water into a larger boiler or into a teakettle. Heat the water to a rolling boil and then take the container off the stove.
- Pour the water down the drain. Remove the plug or other device used to keep the soda and vinegar in the drain and slowly introduce the hot water into the pipe. The hot water will help to carry away any gunk or debris that was dislodged by the use of vinegar and baking soda as a drain cleaner, leaving the drain clear of any obstructions as well as smelling fresh and clean. If some small obstruction remains, repeat the process.