Previous Article

How to Turn on a Propane Gas Grill

Next Article

How to Use a Charcoal Barbecue

How to Use a Char Griller

Char-Griller brand grills have a variety of cooking options available to the grill master. They use a barrel-style construction with an offset firebox for smoking and indirect grilling. However, before using your new Char-Griller it must be properly cured. This ensures years of outdoor cooking enjoyment.

Supplies



  • Vegetable spray or shortening

  • Wire grill brush

  • Charcoal

  • Electric charcoal starter



Curing



  1. Spray or wipe the cooking area, including grates and side firebox with vegetable oil.

  2. Take out the food grate and fill the firebox with charcoal. Pile all of it into the center of the grate and bury an electric charcoal igniter into the coals. Plug the device into an electrical outlet and leave it there for eight to 10 minutes. Unplug it from the outlet and remove when they begin to smoke.

  3. Use the end of the starter iron to spread out the burning coals across the chamber basin.

  4. Return the food grates to their position and shut the lid. Allow the grill to heat undisturbed for an hour until the cooking oil burns off, forming a protective coating inside.

  5. Perform the same process for the side firebox to cure it.

  6. Re-spray or apply cooking oil to the cooking grates.

  7. Ignite the fire with the steps above.



Cooking



  1. Lay out the lit coals for direct grilling. Push the burning ones into piles along the sides for the indirect grilling method.

  2. Place the food on the food grate and cook for the recommended amount of time, depending what you are preparing. Grill temperatures can be adjusted by repositioning the vents. Open vents provide a hotter fire, while closed vents lower the cooking temperature.

  3. Clean the cooking grates thoroughly with a wire brush when finished cooking and the surface has cooled.

  4. Double-check to make sure the coals are extinguished and safely discard the ash.

  5. Apply more cooking oil to the grates to prevent corrosion between uses.