Previous Article

How to Service a Photocopier

Next Article

DIY Poster Printing From the Internet

How to Use a Photocopier


Photocopiers have become a staple in today’s businesses. Over the years, these machines have evolved into complex devices. These instruments often provide many more functions than copying documents such as faxing, printing and scanning. To an inexperienced user, the many buttons and options can become a little overwhelming. Knowing the basics of these machines can make the most rookie users into pros.  Knowing how to use a photocopier can improve your job abilities.


 


1. Locate the power switch to the photocopier. Some switches are on the back, sides or even the front. In most cases it will either be a green button or one that simply says “power”. In some cases, the machine will put itself into sleep mode if it has been out of use for a given amount of time. Pressing the “copy” button will usually take the photocopier out of this mode.


2. Allow adequate time for the copier to warm up. If you have an older model photocopier, this process will take more time.


3. Place your document on the platen located underneath the cover. Be sure to place the document face down on the glass according to the markings along the edges of the glass surface. If the photocopier has a feeder, you won’t have to worry about lifting the cover. Simply load your document(s) into the feeder according to the specified guidelines.


4. Lower the cover in the event that you are not using the feeder.


5. Select the amount of copies you would like to make. There will be a display window to make you aware of the amount of documents that will be printed. The copier may have either numbers, arrows, or plus and minus signs to determine this amount.


6. Choose the color you would like to print in if the copier has this option.


7. Select the size of paper you wish to use. Being that most copiers have at least two paper trays, be sure you know which size will suit your document. If you have a special sized piece of paper, there typically is a “paper bypass” option that allows your to insert that sheet to print on.


8. Select other options that need to be made before printing if necessary. Sometimes copiers that haven’t been set up previously will need the basic set up features. In most cases this will be a step by step process that will not take long.


9. Hit the “copy” or “start” button. Your documents should be printed.