How to Use an Electric Demolition Hammer

Electric demolition hammers is an extremely powerful tool. It is similar to a jackhammer but smaller and handheld. An electric demolition hammer is used to break up and chisel away concrete. Although very resourceful, demolition hammers are very dangerous if not used in the correct manner or with the proper safety gear.

Instructions:

1. Check to be sure that the power button is switched to the “Off” button.


2. Put on your safety goggles and wear rubber gloves to protect yourself from potential flying debris.


3. Insert the demolition hammer’s plug into a power outlet.


4. Put the tip of the hammer’s metal point on the surface you need to demolish.


5. Flip the switch on the power button to the “On” position.


6. Grasp the demolition hammer very firmly using both hands, pull the trigger, and move the tip of hammer’s metal point. The tip of the hammer will start to move in and out of the head of the electric demolition hammer.


7. Move slowly and be sure you are holding the hammer firmly and steady. Continue demolition until the work is completely done. There is no need to add any weight to the hammer because the electric demolition hammer will do that job for you.


8. Pull the trigger and switch the power button back to the “Off” position when you are done.