Previous Article

How to Start Sailboats Engine

Next Article

How to Become a Sailing Instructor

How to Wash Sailboats Deck

In the course of the sailing season, the deck on your sailboat is bound to become dirty from standard use and constant exposure to the elements. Washing the deck is a fairly straightforward and simple procedure, but it does take some strategic planning, elbow grease and several hours of time devoted in order to make sure the job is done in a proper manner.

Items Needed:



  • Bucket

  • Water

  • Deck cleaner (optional)

  • Scrub brush

  • Mop



  1. Plan out the process. Take a good look at the boat; notice the pitch of the deck the high points and the low points and areas where water may accumulate. To make this more efficient process, you will want to start at the highest point of that deck the furthest towards the middle of the boat. Approaching your deck washing in this manner means you can easily work your way down without having to re-clean areas you have already cleaned. Pay careful attention to where you step during the cleaning process so as not to re-contaminate already cleaned areas.

  2. Fill the bucket with clean water. At this point you may use an additive to the water made specifically for deck cleaning.

  3. Divide the deck up into manageable areas. Began at the highest point and wet the deck.

  4. Refill the bucket with water. Using the scrub brush begin to scrub the deck. Make sure to follow that natural contour of the deck and the wood grain. Do not try to go against the grain this only makes for more work.

  5. Rinse the newly scrubbed area. Once you’re satisfied with the cleaning use fresh water to rinse the area in a mop to clean up excess water.

  6. Repeat the steps. Work until all areas of the deck are clean and all excess water has been mopped up.