Previous Article

How To Winterize an Aboveground Pool

Next Article

How to Winterize Unused Lawn Sprinkler Systems

How to Winterize Lawn Sprinkler Systems

If you have a lawn sprinkler system at your home it is very important to properly winterize it before the cold weather arrives. It should be done as early in the fall as possible. Winterizing the system could prevent any serious damage from occurring due to water freezing up in the lines, which could cost you a lot of money to get repaired.

How to Winterize Lawn Sprinkler Systems



  1. Turn off the water supply to the sprinkler system at both the stop and the waste valves. They are usually located in the basement or crawl space of the home. There are even some systems that have an underground valve box, which requires a key to turn.

  2. Drain the pump if the system has one and detach it from the sprinkler system. It should be stored in bubble wrap to reduce the risk of damage to the pump.

  3. Drain the pressure vacuum breaker if there is one on the system by opening the interior supply drain as well as the exterior upstream drain. In order for the water to properly drain from the system the ball valves and both test cocks should be open. Once this is done, remove the cap from the downstream air port. Replace the cap after the water drains and leave the test cocks half open.