How to Winterize Yamaha Jet Boats
You cannot just store a Yamaha jet ski in a garage during the winter months. A few maintenance items need to be completed so the jet ski will perform properly when you take it out again. You should only need a few tools to complete these projects.
- Flush Engine - Keep the engine running at an idle and flush engine for several minutes with the hose connection. It would be a good idea to run your gas tank to a minimal amount of gas before flushing the tank so you don't waist a lot of gas. It's important to keep the engine running because you could cause damage if you flush it without it on. Obviously you don't want to do this while in the water. Find a level dry area where you can safely flush the engine.
- Flush Antifreeze - You can flush this in basically the same way you flushed the engine.
- Clean Air Filter - You might be able to use an air hose to remove most of the dirt. Try finding a special air filter cleaning solution. Some air filters might have a special soap that will help you safely clean the dirt and debris. Be careful when cleaning the air filter. You can easily tear the filter when cleaning.
- Remove Spark Plugs - Make sure you do this when the engine has cooled so you don't burn your hands. Prevent corrosion by spraying fogging oil where the plugs are screwed in. Replace regular spark plugs with desiccant plugs.
- Wash and Wax -This will help provide a nice protection to the exterior to prevent oxidation.