How to Wire Home Security Systems
Home security systems provide much needed piece of mind to homeowners. These systems are designed to notify a monitoring company when someone breaks into your home. The monitoring company then attempts to contact the homeowner by telephone. If this attempt is unsuccessful, the monitoring company then notifies the police.
How to Wire Home Security Systems:
Step 1: Mount your siren in a centrally located area of your home. Mount the back plate of the siren, loosely attaching the siren.
Step 2: Install the control panel. The location for your control panel should be close to the doorway, in which you generally enter your home. Drill holes into the wall for the control panel. Thread the control panel wires behind the wall.
Step 3: Install the window and door sensors. Attach the switch to the magnetic portion together with double sided tape. Using the provided screws, mount these sensors permanently in place.
Step 4: Run all of your wires per the manufacturer's instructions. Connect the sensors first to create a closed circuit. Connect the siren to the sensors and the control panel. Wire your home security system to a backup power source, as well as the primary.