Previous Article

Indoor Palm Tree Maintenance

Next Article

Instructions for Tree Cutting

Information About Tree Removal

Removing trees is a task that requires knowledge, skill and special equipment. Depending on the location, a permit may also be required for the tree removal. Another thing to take into consideration when having a tree removed is whether or not to leave the stump. 


Identification


The surrounding area needs to be assessed before the removal takes place. For example, if there are large trees with roots that are located close to property dwellings, buildings or property lines, removal may cause foundational damage. In addition, removal of the tree may also cause interference with water and sewage lines on the individual's property or the property of the neighbor. Any trees that have cracks and splits in the trunk or signs of wood rot should be removed. Another example would be a tree that is in close proximity to a garage and is ruining the roof of the garage. In some areas, a permit is required for tree removal. It is best to contact the local government agency on the rules and regulations. 


Procedure


The typical procedure of tree removal is to start with the removal of the limbs and branches. This reduces the width of the tree. The next step is to cut the main tree trunk down to ground level. If the tree is significantly tall and wide, then it is usually removed in smaller sections at a time to avoid any property damage. A grinding machine will grind out the stump in order to sever all roots and prevent regrowth of the tree. 


Uses




After the tree is cut down, it is usually hauled away by a tree service. Some homeowners will keep the trunk sections and branches as firewood for indoor fireplaces or outdoor fire pits. The ground stump can also be used as mulch for landscaping. Some choose to leave the stump intact.