Installing Home Theatre Surround Sound
Surround sound will add a great element to your viewing experience. Watching sports and movies will never be the same. You'll feel like you're inside the action when watching with surround sound. These systems shouldn't be difficult to install if you have the proper tools.
Pre-Installation
Place equipment where you want it to be located. This will help you get a better understanding if it will fit. Surround sound receivers should be placed somewhere near your TV. The receiver is the brains of the system. You'll turn the surround sound off and on with the receiver. Make sure you have a safe and secure place for the receiver so it doesn't get damaged.
The subwoofer should go somewhere on the floor relatively close to the TV. Most surround sound systems consist of five speakers: two front, one center and two rear. Place each speaker on the floor beside the wall you want to mount them on. Some people choose to keep the center speaker lower to the ground, sometimes resting on the TV stand if there is room. The other four speakers should be mounted on the walls near the ceiling. Once everything is laid out, you should be able to see if everything will fit the way you want it.
Connect everything to the receiver without actually mounting any speakers. Drag the speaker wire along the floor for now. This is just to see if you have enough speaker wire and so you can practice attaching everything before the final installation. Turn the surround sound on when you’re finished for a trial run. If it works properly, turn it off and unplug everything.
Installation
Connect everything for the final installation. Running wire through your wall for the speakers might seem like a challenge at first. You'll need to drill a small hole in your wall and also mount a bracket for each speaker. Talk with a local expert at an electronics store to get a better understanding. This isn't a tough task, but it would be very beneficial to get an explanation from an expert first.