Installing Home Theatre Wiring
There are several ways to wire a home theater system. If you aren’t particular about the wires being visible the job may require more work. To hide the wires you will need to route them through the walls and floor. You can drill the holes and conceal the wires yourself, or if it’s a bit too complex, hiring a professional may be your best option.
Supplies needed:
- RCA/speaker wires
- Video cables
- Drill
- Key saw
- Choose the thickness of the wiring you’d prefer. Make sure that the wires can fit on terminals and not coaxial ports. Sixteen-gauge wiring is best if you need less than 80 feet of wiring; Use the fourteen-gauge wiring if you need more than 80 feet of wiring, but less than 200 feet. For any wiring needs that extend more than 200 feet, you will need a twelve-gauge wire.
- Connect the wires to your system’s main amplifier. The amplifier input will connect to the output of the audio/video source you have. A DVD player, DVR or cable box will be your audio/video source; the source will use RCA cables. The output wiring can also be RCA or either stereo cables; output wiring depends on the manufacturer.
- If you are using wall speakers, cut a hole in the wall. There shouldn’t be any wall studs in the location that you choose for your speakers. Drill a half-inch hole in each corner for the outline of the speaker’s shape. A key saw can be used to cut the outline out.
- Drill a hole in the wall close to the floor if you’d prefer to route the wires partially through the walls. Connect the wires to the speakers and mount each speaker into its hole.
- Route the wiring through the floor to conceal them. Drill the holes in the floor, close to the wall and near the speakers’ location. Snake the wires through floorboards from the amplifier to the hole at each speaker.
- Tape down, or secure some other way, the wires to keep people from tripping on them. You can also apply paint to the tape in order to hide the cables as much as possible.
- Connect your wires to the speakers. If you are using RCA cables, insert each plug into the port of the same color. Speaker cables can be clamped onto the speaker terminal of the same color.