Instructions for Installing Screen Door Hardware
Screen door hardware is very simple to install. The materials needed can be found in just about any hardware store, and the whole job only takes a few minutes of your time. This project is easier with two people, but can be accomplished by yourself if necessary.
Tools You Will Need
- hammer
- screwdriver
- drill (for certain types of door handles)
- screws to match door hardware
- screen door hinges
- screen door handle(s)
- Choose your door hinges. The size and look of the door hinges you get depends on your own preference. However, it is important that the type of hinges you decide on are large enough to hold the weight of your door. Most screen doors are relatively light and don't require very heavy duty door hinges.
- Screw the new door hinges into the door, using either screws that came with the hardware or screws used on the previous set (if replacing an old set of hardware).
- Attach the hinges to the door frame.
- Add door handles. There are two kinds of door handles. The first kind is a simple pull handles. When using this type of handle the door simply pulls open without having to turn a knob. The second type of handle is a rotating handle. If you are using a pull handle, then just simply screw the handle into the door. If it is a rotating handle you will need to drill a hole for the knob to be placed in first. After drilling the hole, take the knob and put half the knob on either side of the door and screw the knob together. At this point you should have successfully installed your screen door hardware.