Previous Article

Methods of Storing Firewood for Sale

Next Article

Methods to be Aware of Online Business Listing Scams

Methods of Unblocking Drains

A clogged drain can be a big problem for many homeowners. Clogged drains interfere with normal daily life, and need to be fixed as soon as possible. Don’t worry, there are many ways that you can unblock your drain yourself using home remedies and basic plumping tools so that you do not have to hire an expensive plumber to do the job for you.

Vinegar & Baking Soda


For this technique you can use any type of vinegar and baking soda. Sprinkle three-quarters of a cup of baking soda into your clogged drain ensuring that most of it goes into the drain and not the sink. Immediately add two cups of vinegar, and then clog the drain with a wet rag to allow the chemicals to be contained within the drain. Wait for 30 minutes, and then remove the rag and run the hot water to wash the rest of the debris out of your pipes.


Snake Auger


A snake auger is a common plumbing tool that often works to unclog the most stubborn of clogged drains. You will need to purchase or rent one from your local home improvement store. Insert the flexible metal rod into your drain until it makes contact with the clog. You then crank the handle and it applies pressure to the clog forcing it to break free.


Plunger


The first thing you should try when any drain appears to be clogged is a standard plunger. Ensure that suction is formed between the plunger and the drain; and then plunge repeatedly until the drain is free of debris. You may have to do this a few times to free stubborn clogs.


Cola


Pour a two liter of cola into your drain that is clogged. The cola contains phosphoric acid which will assist you in eating away at the blockage in your drain. Allow the cola to sit in your clogged drain overnight and then run the hot water in the morning to check the drain. If the drain is still clogged or draining slowly repeat the process.


Boiling Water


If your clogged drain is caused by grease and oil build-up in your pipes, it will require the heat of hot boiling water to loosen and dissolve the grease. Continue running the hot water for ten minutes so that the grease does not have a chance to solidify again before being worked through your pipes and into your sewage system.