Previous Article

Installing Electrical Switches

Next Article

Installing Electrical Outlets and Fixtures

Repairing Electrical Switches

Repairing an electrical switch takes basic electrical knowledge, but troubleshooting your electrical switches and repairing the problems yourself can save a ton of time and money. There are several things that could be wrong, but most are simple fixes like a loose wire or tripped circuit.


  1. Turn off the power to the electrical switch, and then turn off the power at the main circuit breaker.

  2. Remove the screws from the switch plate. If you are reusing the switch plate, tape the screws to the back.

  3. Attach a circuit tester to the wires on the back of the switch to ensure they are not carrying a current.

  4. Remove the screws holding the switch to the electrical box within the wall. Pull the switch out to see the wires.

  5. Remove the screws holding the wires. Pull the wires out and set the switch aside.

  6. Strip the plastic casing off the wires, leaving an inch of exposed wire to ensure there are no connection problems.

  7. Twist the ends of the wires together, attaching a wire nut to the ends. This will complete the circuit without the switch.

  8. Turn the circuit breaker back on.  If the light comes on, the switch has gone bad and needs to be replaced. If the light does not come back on, you need to call an electrician, because your problem is with internal wiring.

  9. Turn the power off at the circuit breaker again. Remove the wire nut from the wires.

  10. Attach the color-coded wires to the back of the replacement switch, the green grounding wire first. The back of the replacement switch with have color coordinating screws. Loosen the green screw and attach the green wires, wrapping securely. Attach the white wire the same way, then the black.

  11. Align the holes on the new switch with the holes of the electrical box within the wall. Insert screws and tighten.

  12. Attach the electrical switch plate with screws. Turn on the circuit breaker and flip on your light switch.