Previous Article

Precautions With Electrical Appliances

Next Article

Electronic Appliances that Use Electromagnets

Safety of Electrical Appliances

Homeowners use coffee makers, TVs, radios, washers and dryers, blow dryers, curling irons, heaters and dishwashers all powered by electricity. Each type of electrical appliance can pose safety concerns by over heating, shorting out or starting a fire. Checking cords and outlets on appliances in your home can ensure the safety of electrical appliances and prevent accidents.

Cords


Periodically check appliance cords to make sure they are still in good shape. Look for burnt spots, frayed edges, melted areas, tangles or any kind of damage that makes an appliance a safety hazard. When you find problems with appliances unplug them. Get them repaired or replace the appliance. Damaged electrical cords are a frequent cause of fires and electric shocks.


Portable Heaters


Every year house fires are caused as a result of accidents involving portable heaters. Whenever you plug in a portable heater keep safety in mind. Cords that lay on floors are easily tripped on and damaged making them safety hazards. Many portable heaters have blown fuses or trip circuit breakers. If this is happening, you should determine if there is a problem and repair it. Never drape wet towels, clothing or anything else over a heater that can easily catch fire.


Overloading Sockets


Do not overload power supply by plugging in too many appliances into one outlet. Adding an extension cord into a wall socket to use additional appliances may overload the circuit.


Fuses and circuits cut current to power receptacles in the event they become overloaded, but sometimes fail. This can result in overheating, sparks and fires. Watch for warning signs of black spots or burnt areas on appliance cords and power outlets. Take safety precautions and use a surge protector to prevent accidents.


Safety Precautions


Do not plug in appliances requiring more amperage than sockets can handle. Avoid using electrical appliances around water sources such as bathtubs and sinks to prevent electrocution. Never try to modify three-prong cords to fit into standard two-prong outlets.