Prefer to talk to a pro?
Call today, and let us connect you with the perfect merchant!
Call today, and let us connect you with the perfect merchant!
Top Electronic Stores in Laguna Beach, CA
Prefer to talk to a pro?
Call today, and let us connect you with the perfect merchant!
Call today, and let us connect you with the perfect merchant!
Where do you need Electronic Stores ?
Related articles
Types of Electronic Repair Tools
How to Connect a Computer to Your TV
About Electronics and Airline Safety
Updates & tips
The correct operating procedure
1.Starting of the electrical motor a. Retract the side and central supports. b. Insert the power switch key in he keyhole and turn it to ON position, now the instrument light is on, showing that power is connected. c. Grip the handle bar with born hands, turn the handle in right hand slowly in the counter clock direction. Now the motorcycle is electrically started and the entire and begins to move slowly and smoothly. d. The vehicle has the faction of power off when brakes are applied. When riding either applying right hand/left hand brake or it will cut off power in order to protect the motor and ensure safety. e. Once the voltage indicator in the instrument board at the vehicle head shows inadequate voltage be sure to stop riding and have the battery charged. 2.Braking In normal conditions apply both front and rear brakes simultaneously. Note: Slow down by gentle applying the brakes, as that is the only may reduce braking effect and cause the vehicle side slipping or overturn. 1.Parking a. After riding, you should turn off the power switch at once and turn off the vehicle lock at the same time. b. Put down the side and central supports to make the vehicle parking reliably. c. Turn off power and take off the key to be safe. 2.Charging a. Turn off power switch, and check to see that vehicle lock is closed. b. When charging, plug in the charger’s output plug into the charging socket of the battery box and then plug in the charger’s input plug in the household power outlet socket (220V). Power indicator and working status indicator are both red, indicating power is on and charging is proceeding. After charging for 2-8 hours the working status indicator turns to green showing the battery is basically full. Now the charger is in “gentle charging” state with micro current. c. After charging is finished take out both plugs of the charger. Note: ☆Don’t operate the battery under low sufficient, otherwise it will influence the useful life of battery. ☆Don’t keep the battery in wet condition or meal contact to avoid damage. ☆Battery should be stored with sufficient electricity and charged once a month when it stops to be used for long time. ☆In the process of charging, if there is odor or the temperature is too high, please stop charging immediately and contact your sales agency.
Information for safe riding
Information for safe riding 1. Before riding please checkup the vehicle to make your ride safe. 2. Please do as following to avoid unnecessary damage. a. Wear bright clothes. b. Don’t ride too close to other vehicles. c. Observe the national and local rules and regulations of traffic. d. Please turn on the turning light when turning to warn others where you are going. e. Be sure not to ride with one hand. f. Strictly forbid to ride with people (except children). g. Don’t urgent start on wet or rainy roads. 3. Dress protecting. a. Wear safety helmet, glasses and gloves. b. Be sure not to wear large clothes to avoid catching the handle. 4. Be sure not to load heavy things (lighter than 15kg), and the things should be fixed on the vehicle firmly. Don’t hang any things on the handles to avoid affecting riding. 5. Don’t clean the vehicle with water when cleaning the vehicle to avoid damp and short circuit.