Prefer to talk to a pro?
Call today, and let us connect you with the perfect merchant!
Call today, and let us connect you with the perfect merchant!
Top Electronic Stores in Kennesaw, GA
Prefer to talk to a pro?
Call today, and let us connect you with the perfect merchant!
Call today, and let us connect you with the perfect merchant!
Where do you need Electronic Stores ?
Related articles
Types of Electronic Repair Tools
How to Connect a Computer to Your TV
About Electronics and Airline Safety
Updates & tips
Lead Acid Batteries Assembled by Powerenz
A turn-key, portable solar power system that is assembled in the Powerenz shop in Georgia, USA, may include a few types of battery chemistries, primarily lithium or lead acid. Lithium and lead acid batteries have pros and cons. In this short very basic overview, we will focus on lead acid batteries. Lead acid batteries come in liquid, spillable and non-liquid, non-spillable forms. In our portable systems, the non-liquid forms are used. Other terms that are used to describe the non-liquid form include marine, deep cycle, AGM, and gel. Compared to lithium chemistry batteries, lead acid batteries are heavier, less expensive to build, though more expensive to ship (weight), are able to discharge a smaller percentage of their total rated capacity, and cannot endure as many charge – discharge cycles as lithium batteries. For the user ofportable solar powerwho does not mind the increased weight of a system that utilizes a heavier lead acid battery, who does not mind the less expensive “open architecture” set-up, and who does not want to pay the increased cost for a system that utilizes a lighter-weight lithium battery, lead acid may be the better choice. A perfect example of a scenario where a lead acid system might be preferable would be a car-camping adventure (weight is not an issue) where the campers’ budget cannot meet the cost of a lithium chemistry system. Very small lead acid systems can be enclosed in soft bags or carrying cases, backpacks, or other non-hard case enclosures. As the size and weight of the lead acid battery increases, the system must be enclosed in a hard case for obvious reasons. In a typical hard case system, the battery and other supportive electronics are mounted inside the case, and all of the components are covered by a fancy, neat and clean, labeled “top panel” that is mounted to the case. The top panel hides the electronic components that are below it and makes the inside of the case look high-tech and neat. Top panels are cosmetic, give an appearance of organization, and may impart a sense of quality, but they require a great deal of extra work to install and they add to the cost of the system. With or without a top panel, the system functions the same. In the absence of a top panel, the appearance of the system in a hard case can be referred to as “open architecture”, and the end user has visual and physical access to all of the components of the system. Many of our clients prefer the open architecture assembly. They enjoy working on their own systems, seeing and testing the components, and having a better understanding of the structure and flow of electricity within. The open architecture design is less expensive. Lead acid batteries are generally safe in wet conditions, waterproof, and resistant to salt water and salt water mist. On the other hand, many of the electronic that are necessary components of the system are not waterproof or resistant to salt water. For those users who require that the electronics be protected from water, a hard case enclosure that is rated for water exposure/immersion is necessary. In addition to protection against water, a hard case can provide protection against dust, dirt, wind, blunt trauma, smoke, insects, and animals. Lead acid batteries are very easy to charge using a variety of sources of power, including AC via the utility grid, DC, and a solar panel. To recharge a lead acid battery using a solar panel, one additional electronic device is necessary, and that is a solar charge controller. Asolar chargecontroller establishes an electronic relationship between the solar panel and the battery. It processes the electricity that is produced by the solar panel, and makes it appropriate for charging the battery. Add some good wiring and sunshine, and the end user will be the one who has power. In the event that the battery completes its lifespan, a “dead” lead acid battery is simple to swap for a new battery. Lithium batteries are more complicated and expensive to replace, though they do not need to be replaced as often... Following are several photographs of lead acid battery systems of various sizes, and all of open architecture design:
Portable Solar Panels
Over the years, there has been a significant rise in the demand for portable solar energy all over the world. It is one of the best alternatives to campground hooks ups or generators. Earlier, the only form of portable electrical energy was generators, which were bulky, heavy, and noisy. Even though solar energy was available for a long time, but back then, they were expensive and ineffective. But now, the portable solar products which are widely available around the world are now cheap and highly effective. They are used for a wide variety of jobs today. And due to this wide availability of portable solar products, there has been an increasing demand for them all around the world. So, let us have a look at some of the primary advantages that one could acquire when they opt for theportable solar panel. •No need for drilling holes and complicated wireworks Portable solar products can be easily fitted anywhere. They can be installed at any place of your house without drilling and dealing with complicated wireworks. Most of the popular portable solar products come in a briefcase in which the panels are fitted. So, all you will need to do is open up the briefcase and place it under the sun. And once it gets charged, you can use it till the last drop. Moreover, there are many portable chargers available that come with USB ports, which can be used for charging your Laptops and Mobile. •Stay under the shade Unlike the fixed solar panels, you won’t need to stand under direct sunlight for charging your solar product. You can park your RV under a tree or shade and place the solar panel outside under the sunlight. Through this, you will save your skin as well as your RV from heat damage. •They are compact One of the best things about the portable solar panels is that they can be easily accommodated at any corner of your RV. Since most of the RVs have a small roof space where the solar panel cannot be fitted, the portable solar panels are of immense benefit. They can be easily fitted under your bed and cabinets as well. This will help you to replace the bulky generators and make up space for accommodating more essential products. •No requirement of maintenance Unlike generators and big solar panels, there is no requirement of maintenance when it comes to the portable solar charger. All you will need to do is climb up on the tip of your car and clean off the dust or snow from the panels and that too if you have placed them on top of your RV. •You can move them to your new RV Yes, I know what portable means, but still, for the sake of conclusion, the portable power system is highly portable, and they can be easily moved from one RV to another and can be done by anyone. So, if you want a constant supply of energy regardless of where you are, then solar panels are one of the best choices for you.
Portable Solar Power Systems
Portable solar powerrefers to the techniques, technologies and equipment that are used to capture, store, and use power from solar energy whenever conventional grid power is unavailable, inaccessible, or not desired. Portable solar power can be used when you find yourself in one of the following typical activities or situations: 1. you require power during off-grid camping, 2. you want your cell phones and important communication devices fully charged during times of natural disasters and calamities, 3. you want power for your research equipment while in remote areas where conventional grid power is unavailable, 4. you want back-up power during the frequent interruptions in power from your grid, or during prolonged blackouts due to grid failure, and 5. you are part of a military organization and you require power for your remote off-grid operations and expeditions. Such situations are exactly where and when portable solar power becomes critical and saves the day. Conventional grid power is unavailable or inaccessible in many places where and when it is needed badly. Portable solar power systems convert sunshine into electricity, store it, and makes it available to be used when it is needed during nearly any situation or circumstance. As the phrase suggests, portable solar power systems are mobile and are designed to be easy to carry and/or move around. As long as the sun shines, you will have electrical powerto keep your electronic devices operational when you need them the most.In our BLOG, you can watch two educational videos aboutportable solar poweralong with three other videos. When You are On the Go, Capture the Light of the Sun and Turn It into Electricity. There was a time when the solution to the lack of grid power was to leave your electronic gear at home, but in an increasingly tech-oriented society, that is not acceptable. You probably need access to a source of power no matter where your mission takes you. Have you ever found yourself in one of the following situations or in a situation that is similar? 1. You are part of a mountaineering expedition at 18,000 feet in search of a chunk of meteor that broke off of the planet Mercury. You must recharge the batteries for your satellite phone and mass spectrograph, but there are no electrical outlets nearby. 2. You are a photographer who is filming the rarely seen Snow Leopard in a remote wilderness district in south-central Asia where there are no electrical outlets, and you need to recharge your huge and expensive Red Cinema Camera batteries. 3. You are an insurance agent who is assessing the extensive damage in an area of a recent tsunami. You have a laptop and a printer, but there is no electrical outlet. 4. You are a scientist who is studying water quality in a remote region of Antarctica where there are no electrical outlets to power up your sophisticated electronic devices. 5. You are a soldier who is isolated and stuck in the mountains of Afghanistan. Your rucksack is loaded down with heavy batteries for your Harris radio set, but there is no way to recharge them. 6. You are one of a group of surfers who are enjoying an extremely hot afternoon on a smoking hot beach in the Sonoran Desert where there are no electrical outlets. It would be nice to have a cold drink, but there is no way to power up your small energy-efficient refrigeration unit. If you have found yourself in a situation similar to one of those described above, or plan to do so and you need a strategy, you have come to the right place. HOW CAN POWERENZ HELP? Plug into the Power of a System that is Rechargeable by Sunshine. At Powerenz, we provide portable solar panel systems of unrivaled efficiency. Our ultra-lightweight, up to 24.2% – efficient, foldable solar panels can provide the power you need to get the job done, no matter what your goals may be. We have a background in developing mobile power systems for a variety of applications, from recreational to military, scientific research to medical missions, photography to backpacking and camping, and the simple provision of a backup power source for segments of your home. Each of our systems is durable, portable, and delivers the power you need to keep your devices and equipment charged and ready to use.