Prefer to talk to a pro?

Call today, and let us connect you with the perfect merchant!

1-844-686-2616

Call today, and let us connect you with the perfect merchant!


Prefer to talk to a pro?

Call today, and let us connect you with the perfect merchant!

1-844-686-2616

Call today, and let us connect you with the perfect merchant!

Where do you need Auto Detailing Services ?

Updates & tips

When to detail your car

Every day drivers should have a complete detail at least once a year. This insures that every nook and cranny was thoroughly cleaned. This is also a good way to find minor underlying problems before they cause major damage. This is the same as having a yearly check up with your doctor.

Waxing

Purpose of Waxing Waxing is the ultimate form of protecting an automobile's finish. Wax comes in many forms such as cream, paste, and liquid. Many waxes containcarnaubawhich contains a high amount of fatty acids. This fatty acid creates a solid layer between the paint and the outside world which protects it, and gives it a shiny finish. Synthetic waxes are regarded as the most effective product available. Synthetic wax contains strong U.V. inhibitors. Synthetic waxes commonly mix low amounts of cleaners with high amounts of U.V. inhibitors to create the same protective layer that carnauba does. synthetic wax creates a high gloss while carnauba waxes give a warm and wet looking finish. Beyond waxing would be sealants. Synthetic sealants are polymer or acrylic based and provide triple the durabilty and much more protection than even the best carnauba wax. They are liquid in form and apply very much like a liquid wax. It is suggested that a sealant cure for 12 to 24 hours before layering additional coats on the paint, but that is rarely an issue for sealant users. The only tricky thing about sealants is that the surface of the vehicle must be properly prepared for a sealant. You cannot apply a sealant if there is any wax on the car or other contamination that would inhibit the bonding of the product to the paint. You must first polish and clean the paint prior to application. Once you top a sealant with a wax you will not be able to put additional layers of the sealant on without first cleaning the paint and removing all the wax.

Purpose of Polishing

Purpose of Polishing The purpose of polishing is to remove contamination, swirls, scratches and other imperfections from the paint. In contrast to the clay, which removes contamination from the surface of the paint, polishes penetrate the clearcoat or the paint itself on single stage paint. Polishes are classified based on how abrasive they are. Rubbing Compound will remove the heavy scratches and oxidation. It can be compared to a fine sandpaper. Polish is used to remove light oxidation and fine scratches. It can also be used to remove light imperfections such as swirl marks or water spots. Pre-wax cleaner is also a polish. It is used prior to waxing to remove very light contamination and dirt. Glaze is the finest polish. It does not remove the imperfections but has the power to enhance surface gloss. There are other products such as a "buff and wax" which contain a high level of cleaner and U.V. protectant or carnuba, producing a polish and a protect effect.