REPAIR YOUR OWN VACUUM CLEANER - THE VACUUM SHOP - ROUND ROCK, TEXAS

UNPLUG VACUUM  TURN OVER ON TABLE TO CHECK BRUSH ROLL CLEAN BRUSH ROLL OF HAIR AND CARPET FIBERS WITH SCISSORS TWIRL BRUSH ROLL TO SEE IF BELT IS OFF AND IF IT WILL TURN FREELY WIGGLE BRUSH ROLL TO SEE IF IT IS DAMAGED (IF IT MOVES TOO MUCH, YOU MIGHT NEED A NEW BRUSH ROLL) TAKE OFF BRUSH ROLL BY REMOVING ALL VISIBLE SCREWS REPLACE WITH A NEW BELT (MOST VACS WILL HAVE THE BELT # ON THE LABEL OR THE MACHINE)  YOU CAN ALSO TAKE THE BELT TO A VACUUM SHOP AND THEY WILL EASILY MATCH IT CLEAN ALL FILTERS/OR CHECK YOUR BAG AND REPLACE IF MORE THAN 1/2 FULL BAGLESS VACS NEED THE FILTERS CLEANED OFTEN AND REPLACED WHEN THERE IS AN DIFFERENCE IN THE CLEANING STRENGTH GET TO KNOW YOUR VAC WHEN YOU BUY IT.  LOOK THROUGH THE BOOKLET AND GO OVER THE MACHINE AND BECOME FAMILIAR WITH IT IF YOU VAC BECOMES LOUD, IT MAY BE CLOGGED, WHICH HAPPENS WHEN YOUR FILTERS ARE TOO DIRTY OR YOUR BAG TOO FULL OR IF YOU VACUUM UP SOMETHING YOU SHOULD NOT HAVE. NEVER PUT A DAMP FILTER BACK IN YOU VAC OR VACUUM UP ANYTHING DAMP ! GO ON THE INTERNET AND FIND YOUR CLOSEST VACUUM SHOP FOR REPAIRS, FILTERS AND BAGS