DIY Home Maintenance on a Fuel Oil Boiler
Boilers help to heat homes during the winter season. Fuel oil boiler uses oil that is released from the boiler to heat your home. Doing regular maintenance on the boiler will keep it working properly for longer periods of time. There is some DIY home maintenance that you can do on your boiler to keep it working well throughout the duration of the winter.
Things you'll need:
- Vacuum
- Filter
- Cloth
- Brush
- Screwdriver
- Paintbrush
- Turn the fuel oil boiler valve off and allow it time to cool. You can find this valve on the outside of the oil boiler. Open the service door to the boiler.
- Remove the old oil filter and insert the replacement filter. The filter clogs very quickly over prolonged continuous use, because it uses oil, and needs to be changed regularly. The filter is located on the side of the oil pump. To access it remove the bolts on the outer cover of the pump casing. Replacing the filter will help your fuel oil boiler run smoothly.
- Vacuum off the boiler's motor and wipe it with a cloth to get rid of dirt and debris. Vacuum and wipe off the draft regulator with a cloth as well and make sure to wipe both sides.
- Clean the area around the boiler. Vacuum and dust the area the boiler is in and remove anything from the room that could possibly be blocking the airflow around the boiler.
- Remove any thermostat covers in the room and use a cloth or paintbrush to brush away any dust.
- Close the service door and turn the oil boiler valve back on. Start it up when you’re ready and enjoy its full efficient usage.