How to Repair Antique Electric Tools
Antique electrical tools are easily fixed and refurbished. You can apply the same basic electrical repair techniques to fix antique electrical tools as you do with the updated tools. With antique tools it is best to check the switches, windings and wires. Keep them well maintained and replace them as needed.
Materials Needed
- Bright work light
- Small paint brush
- Solder
- Flat-head screwdrivers
- Replacement electrical cord (cloth-style or modern plastic-coated style)
- Plug end for electrical cord
- Examine the antique electrical tool closely using a work light. Check the service manual to make sure that all of the parts needed are present. If there are missing parts, order new parts from the company that sells the product and install them.
- Check the antique tools electrical cord and analyze the condition that it is in. If the wire is exposed at any part replace the whole electrical cord. If the cord is connected with the screw style, make sure that the bare wire ends are screwed into place. Do not let the bare wires touch any metal in any other place.
- Clean the antique electrical tool removing any grit, grime, or dust that has accumulated with a dry rag. Remove the screws without jarring loose any of the inner workings and clean the inside of the tools. Use a small paintbrush if needed to clean the tools. Once finished cleaning reassemble the tools.
- Test the tools. Plug in the tool and turn on the switch to make sure the tool is working. If the tool is still not fully functional troubleshoot the problem by repeating the steps mentioned above.