How To Make Wire Cross Jewelry
Wire cross jewelry making is not a beginning jewelry technique. You will need skills like wire wrapping, crossing and weaving wires, using several jewelry hand finishing techniques with the jewelry pliers and the long needle for wire wrapping. Learn the basic technique for making wire cross jewelry to start your jewelry-making venture.
- Cut six 24-28 gauge silver wire, 3 inches in length. Warm the silver with your hands or pulling the silver across the wrapping needle a few times.
- Cut two other pieces of 6 inches to wrap around the final cross, maybe more depending how many times you wrap the area.
- Take each individual piece of silver and loop the ends closed by wire wrapping the end to the length of silver, finish this evenly on all six 3-inch wires.
- Join three of the wires together with your fingers, hold them parallel to each other and flat. On the first wire, make another wire loop from the long single strand of silver wire, proceed to wrap the three pieces of silver together with the long wire. If you have bead-wrapping techniques you can then wrap beads onto the cross, be certain to add additional wire for every bead you wrap.
- Repeat this process for the other length of the cross. The simple technique, once you arrive at the cross's center is to cross wrap the two lengths of silver, then finish with the other length and loop closed.
- Any gems you want to place on the cross can be accomplished during this final stage. Measure the silver wire and place gem using the silver wire into place with any wire wrapping technique.
- Press and clip any loose or uncut wires. Polish to ensure a smooth finish.