How To Program a Viper Keyless Entry
When you program your Viper keyless entry remote it gives you the ability to unlock and lock your doors much quicker. The keyless entry remote also has a panic button that can be pushed if needed. You can program a Viper keyless entry remote in a few short minutes by pressing the correct buttons in the correct order.
- Open the car door and make sure the dome light is on. You can leave the car door open during this process. Insert the car key into the ignition and turn it to Run.
- Press and then release the Valet/Program button one time on the Viper keyless entry remote. Press and hold the Valet/Program button until you hear a small honk or chirping sound.
- Press any button on the Viper keyless entry remote and keep it pressed down. Repeat these steps to program any additional remotes you may have. When you have finished programming each remote, release the Valet/Program button on the first Viper keyless entry remote.