How to Adjust Downhill Ski Bindings
When downhill skiing, it is important that bindings are adjusted accordingly. The tightness of the bindings will determine how much force needs to be applied in order for the skis to come off if the skier falls or crashes. A properly-set binding is an important safety factor in downhill skiing.
Things You Will Need:
- Screwdriver
- Determine the proper distance between the ski bindings. Look inside your ski boot for the number that states the length of the sole of the boot. Your downhill skis will provide you with the information that you need in order to convert the sole length to the correct binding distance.
- Slide the bindings into their proper location. Press securely on the clips that hold the bindings in place and slide them to the location as determined by the information above.
- Calculate your DIN. Visit dinsetting.com and enter the required information regarding your weight, height, age, boot length and ski experience. Press submit to calculate the DIN. Make note of your DIN number.
- Set the visual indicator to your DIN number. Use a screwdriver to turn the screws that are located at the front and back of the ski bindings. As you turn the screws, the visual indicator will move. Stop turning the screws when the number on the visual indicator matches your DIN number.
- Test the fit of your bindings. Press your foot into the newly-adjusted bindings and walk slowly around the room. The bindings should feel secure. If you feel your feet slip or slide in the bindings, take the time to adjust them again.