How to Build a Wine Storage Room

A wine storage room is an area in a person’s home that holds their many bottles of wine. They may be used to hold collectable bottles, or bottles they create homemade. You can build a wine storage room in your home by following a series of instructions.

Items Needed:

• Large room


• Concrete


• Vapor barriers


• Wooden wall studs


• Refrigeration wine zone handler


• Dry wall


• Wine cubes


• Measuring tape

1. Pick a room in your home that has an ample amount of space. A larger space is easiest to work with when you’re creating your wine storage room.


2. Seal the walls with concrete before beginning to create your wine storage area.


3. Install a vapor barrier on all areas of the wall.


4. Run wall studs from the floor to the ceiling on all four walls of your wine storage room, over the vapor barriers.


5. Frame the area of the room with the wooden wall studs.


6. Install refrigeration for wine zone air handler. This system keeps the air at a good temperature for wine storage.


7. Cover each wall with high humidity proof drywall. This type of drywall will not be damaged from the high humidity levels that you’ll have in your wine storage room.


8. Measure the largest wall in the room. You’re going to fill this wall with wine cubes to store your wine bottles in.


9. Create enough wine cubes to cover the entire wall you where you measured. These cubes can be made easily from plywood or another wood of your choice.


10. Install the wine cubes on the wall in a pattern you like. You can choose to cover more than one wall if you have larger storage requirements.


11. Decorate the remaining walls with décor of your choice.