How to Caulk Outdoor Wall Lights
Caulking outdoor wall lights is necessary to prevent snow and water from getting into the spaces left after installing the lights. Precipitation can get into the areas and cause damage. It could also be a danger to have water coming into contact with the wiring. Caulking will help to keep your home safe and your lights working properly.
Materials needed for caulking outdoor wall lights:
- Caulk that is designed for outdoor use: this would be silicone caulk; it will not break and crack from extreme temperature changes.
- Caulking gun
- Cleaning cloth
- A cup of water
- Clean the area around the lights. You will want to remove dust and debris so the caulk will adhere to the area.
- Cut the tip off of your tube of caulk. You will want to cut this at an angle. Where on the tip you cut depends on how big you want your bead of caulking to be when it is squeezed out. Look at the space around your wall lights to determine the size of the bead you want.
- Load your caulking gun. Hold the gun in your hand; slide back the rod. Insert your tube of caulk. Be sure the nozzle part is facing the front. Slide the opening in the gun, push it as far forward as you can. Pull the trigger on the gun until the disc on the back of the gun reaches the back of the tube of caulk. Stop before any caulk starts to come out.
- Hold the nozzle up to the area around your wall lights that needs caulking. Squeeze the trigger as you move the gun around the entire area. Be sure get the top, bottom and sides so there are no spaces.
- Place your finger in the cup of water. Use your wet finger to smooth the caulk.
- Let the caulk dry then check again for any spaces that may need caulking. If you find any, repeat the process. The caulk is made to last for between 20 and 30 years so you should not have to do this again for a long time.