Previous Article

How to Use a Multimeter as Battery Tester

Next Article

How to Maintain the Car Battery Tray

How to Clean a Car Battery Tray

If you love keeping your car in impeccable condition, even under the hood, you may want to clean your car’s battery tray. Not only does cleaning keep your car looking nice, it can prevent corrosion and help extend the life of your battery and surrounding parts.

Items Needed:



  • Baking soda

  • Water

  • Rags

  • Rust remover

  • Steel wool or a wire brush



  1. Remove the battery and place it aside. If there is a plastic liner on the tray, remove it and set it aside also.

  2. Mix a paste solution of baking soda and water. The paste should have the consistency of a thick liquid.

  3. Put on heavy rubber gloves and use a brush or rag to apply the paste to the tray. Thoroughly coat the tray with the mixture and allow it to set for a minute. The baking soda will neutralize the battery acid, making it easier and less corrosive to work with.

  4. Wipe up the paste with a clean rag until it is completely cleaned up.

  5. Use a steel wool pad or a wire brush mixed with rust remover to scrub off any rust on the tray. This step must be performed carefully so none of the rust or chemicals spread to surrounding components. Any spilled messes can damage surrounding parts, so use special care to keep the mess contained.

  6. Use another clean, wet rag to wipe up the rust you scraped off the tray. Rinse the rag in a bucket of water or with a hose and continue wiping the tray down until it is free of any loose rust or debris.