How to Use a Multimeter as Battery Tester
A multimeter is an electronic device that can be used to troubleshoot several different types of electrical wiring or devices, but one of the most common ways it is used is as a battery tester. The multimeter is fairly simple to use.
Using the multimeter to test batteries is something you can easily do by following a few simple instructions. It is recommended that you test all the batteries you have laying around the house when you start testing because it only takes a matter of minutes to test a battery.
- Gather the batteries you want to test with the multimeter. You will need to remove the battery from the device it is in so you will be able to check it.
- Examine the battery to determine the voltage. If the battery is AA, AAA, C or D the voltage would be a 1.5V. If the battery is a 9V it would also be a 9V according to the meter.
- Set the dial on the multimeter to measure voltage. You are going to be measuring DC voltage, with the maximum being the battery's rated voltage.
- Connect the multimeter to the battery. The voltage will match the rating of the battery if it is live. If the rating is slightly less than it should be it is considered to be a used battery and it still has some life left in it. If the rating is less than 2/3 of the voltage it is a dead battery and needs to be replaced.