Previous Article

How to Convert a Charcoal Smoker to Electric

Next Article

How to Convert a Propane Grill to a Lava Rock Grill

How to Convert a Natural Gas Grill to a Propane Grill

Switching from natural gas to propane for your grill will give you more energy and heat, which allows for faster cooking. Propane grills are also convenient because they are portable. Doing this conversion does take a bit of skill and it should be noted that doing so would void your existing warranty.


 

Things you will need: 



  • Conversion kit

  • Propane regulator

  • Hosing equipment to connect to valve

  • OPD connector

  •  Set of wrenches



  1. Locate the manufacturer's guide for your existing gas grill. Look to see if there is a conversion kit available for the grill. If you can't order one directly from the manufacturer then you will need to purchase a conversion kit. You can purchase these from a propane dealer. 

  2. Disconnect your gas line. Once you have obtained a conversion kit, disconnect the gas line from your grill. Next, take the orifice fittings off the burner. These are located at the end of the valve with the small hole drilled in the center.

  3. Change the orifices. You will need to replace the orifices with adjustable or replacement orifices. Look up the sizing guide before buying new orifices.

  4. Remove the hosing. Once you have purchased the correct size orifice then you need to remove the hosing from the valve system on the grill.

  5. Remove the gas regulator. Take it off the grill and exchange it with the regulator that came in the conversion kit.  

  6. Connect the OPD connector. This device protects an accidental overfill of the connector which prevent fires.

  7. Secure all your connections. Run a test by spraying soapy water on the connections. If you see any bubbles or hear a hissing sound, this indicates a leak and you will need to tighten that connection.