How to Convert a Propane Grill to a Lava Rock Grill
Gas grill lava rocks are seen as superior to charcoal because they save time that would be spent setting up the charcoal. Propane is also a cleaner fuel, which is important to many. Converting a propane grill to a lava rock grill will give a more evenly-heated cooking area because the lava rocks disperse the heat evenly. The conversion is a simple process, resulting in a faster readiness for grilling.
Many people decide to convert to using lava rocks for the purpose of saving on propane. Lava rock in a propane grill will decrease the amount of propane needed to cook the food. For those who like to smoke meats, it also aids in the smoking process. The conversion is a simple process of doing the following:
- Open the grill lid and remove the cooking grates.
- Clean the cooking grates and inside of the grill. To remove the old grease, use a wire brush and grill scraper.
- Have a second set of grill grates that are the same size as the other ones. If your grill does not have a second set located directly above the propane inlet rails, purchase another set. If your grill has these, or you do not want to use a second set of grates, skip the next step.
- Place the second set of grill grates over the propane inlet rails.
- Add the lava rock onto the grill, laying each piece next to each other. The sides of each piece of lava rock should touch the sides of another piece. If you are not using a second set of grates, you must pile the lava rock between the propane inlet tubes until it is approximately 2 inches above the tubes.
- Put the cooking grate back in place.
- Burn off any dirt and dust by heating the grill for ten minutes. Do not place any food to cook on the grill during this time.
To increase the efficiency of the lava rocks, turn them over frequently. They should be replaced annually since lava is porous and allows grease to accumulate.