Previous Article

How to Do Research in an Academic Library

Next Article

How to Do Scrapbooking

How to Do Sconces and Scarves Window Treatments

A sconce and scarf window treatment can dress up an unadorned window or add a bit of interest and zest to a plain curtained window. Window sconces can be used to add a touch of elegance to any window. The window sconces allow curtains to be hung as scarves over the window. The scarves can complement other curtains that are hung on the window.  Two sconces are needed to be used as window treatments.

Items needed:



  • Fabric for the scarf

  • Sconces

  • Screwdriver

  • Sewing machine

  • Needles and thread

  • Pins

  • Tape measure

  • Drill



Instructions:



  1. Measure the width of the window from the outside of the frame. Measure the height from the top of the outside of the window frame to the floor.

  2. Cut the fabric so that it measures 24 inches wide and as long as the width of the window's height plus six inches.

  3. Fold the 24-inch sides of the fabric over 1/4 inch then 1/2 inch and pin. Sew along the edges to hem. Fold the long sides of the fabric over 1/4 inch then 1/2 inch and pin. Sew along the edges.

  4. Stretch the fabric out and begin folding it lengthwise into accordion pleats. Find the center of the folded fabric. Measure half the width of the window plus three inches away from the center on each side. Push a pin through the fabric at the measured spots.

  5. Position the sconces on the wall next to the frame. Use with the measuring tape and level to make sure that both of the sconces are evenly spaced and level on both sides. Mark where the top of each sconce is on the wall.

  6. Drill a hole into the wall for each screw. Measure the distance from the top of the sconce to the screw hole on the back then measure the distance from the pencil line on the wall to where you want to drill. Attach the screws to the wall.

  7. Mount the sconces to the screws, making sure that they are straight and even. Thread the scarf through the holes in the sconces. 

  8. Pull on the pleats in the center of the scarf so that it forms a drape in the middle of the window. Straighten the sides of the scarf so that they hang neatly. Pull on the sides of the scarf if the center portion is hanging too low or not low enough.