Previous Article

How to Fix a Virus

Next Article

How to Fix an Optical Mouse

How to Fix an Electrical Plug on a Lamp

While troubleshooting issues with a lamp, faulty electrical plugs are one issue to consider. If the electrical plug is the problem, it is possible to fix this lamp by replacing the plug instead of buying a new lamp. For this project you need a new lamp cord, wire cutters, wire clamps and electrical tape.

How to Fix an Electrical Plug on a Lamp:



Step 1: Unplug the lamp. Cut a length of the cord using wire cutters.



Step 2: Expose roughly one inch of wire on the old cord to reconnect it to the new cord. Use standard wire cutters to expose the wires by lightly clamping down onto the wire casing only. Then pull the casing back from the wires.



Step 3: Connect the old wires to the wires of the new cord. Some cords are color coated to enable you to match them to each other. If the wires are copper, you will simply twist them together.



Step 4: Place a wire clamp over the exposed wires to properly cover them. Add a couple layers of electrical tape around the outside of this clamp to secure it.



Step 5: Plug this lamp into the outlet to ensure that it works properly.