Previous Article

How to Unlock a GMC Truck Door

Next Article

How to Find a New GMC Truck

How to Flush a GMC Truck Radiator

The radiator is an important part of a GMC truck's cooling system. Regular maintenance of the radiator can prevent having to pay for costly repairs. Flushing a radiator is an easy task for someone that has basic knowledge of the different parts under the hood of a truck.

Items needed:



  • Large bucket

  • Garden hose attached to water source

  • Automotive chemical cleaner (optional)

  • Antifreeze



  1. Park your truck in an area with good airflow. Apply the parking brake of the truck. If you have just driven the truck, give it time to cool down. You do not want to work with a radiator that is full of hot fluid.

  2. Before flushing the radiator, you will need to drain the radiator fluid. To do this, open the radiator plug that is located at the bottom of the radiator and drain all of the fluid from the radiator into a large bucket. After emptying the radiator, move the bucket underneath the engine block. Release the plugs from each side of the engine block and drain the fluid.

  3. To flush the radiator, use a garden hose and run water through the radiator until the water runs clear. If you see rust or scale on the cooling tubes and engine, use a specially made automotive chemical cleaner to remove the deposits. If use of a chemical cleaner is required, flush the radiator again with water from the hose.

  4. Remove the overflow hose from the coolant reservoir and use the garden hose again to fill it with fresh water. When the water runs clear reconnect the overflow hose.

  5. Tightly close the radiator plug and the engine block plugs.

  6. Make sure the heater temperature control is set to maximum heat.

  7. Refill the radiator with a mixture of 50% antifreeze and 50% water.