How to Hot Foil With a Laminator
Gold foil, or gold leafing as it's also known, adds formality to any document. It can be applied to almost any paper which contains printed ink. The process of gold foiling is accomplished with pressure and heat. In a few simple steps, and the proper tools and supplies you can add sophistication to correspondence.
Supplies
- Gold foil paper
- Printed document
- Cellophane tape
- Cardboard
- Laminator
- Scissors
- Decide which areas of your document are to be foiled. This is often an emblem or company logo.
- Cut the leafing paper out so that it covers the area to be foiled. It should only touch the printed inked area to be leafed. Make sure you do not handle the front surface of the foiling. This can dislodge the gold particles on the paper and won't stick properly to the document.
- Place the gold leaf paper right side down against the area to be leafed. Secure it in place with very small pieces of the cellophane tape. Only allow a sliver of the tape to touch the original document. This will prevent damage when it is removed.
- Lay the document between two sheets of thin cardboard, such as poster board. Make sure the document and cardboard cover will fit easily through a laminator's rollers.
- Turn on your laminating machine and allow it to heat up.
- Feed the cardboard containing the paper into the laminator. When heat and pressure from the machine are applied, the gold foil will transfer to the print on the selected area of the document.
- Once processed through a laminator, take the leafed document out of the cardboard protectors and carefully pull of the gold foil background paper and tape.