How to Install a CD Player for a 1997 Saturn SL2
The 1997 Saturn SL2 model came only with a cassette and a regular stereo. Adding a CD player will add value to your car and functionality. Installing a CD player in the car is rather simple and can take less than an hour to do. The majority of the steps consists of disconnecting a few simple wires and removing an adapter.
Tools Needed
- 10 mm wrench
- Ratchet
- Sockets
- Small screwdriver
- Wiring harness adapter
- Stereo to CD player installation kit
How to Install a CD Player for a 1997 Saturn SL2
- Locate the hood lever on your car and pull it to lift your hood.
- Use a 10mm wrench to loosen the negative battery clamp. Remove the negative battery clamp from the terminal.
- Remove the connectors on both sides of the central panel with a Phillips head screwdriver.
- Slide the center console panel away from your car's dashboard. Remove all wiring that is connected to the backside of the panel. Put the panel to the side for later use.
- Use your 7 mm ratchet and socket to remove the two bolts that connect the stereo.
- Move the stereo back to access the wiring that connects the rear panel.
- Disconnect the black antenna cable and remove all wiring.
- The stereo will need to be plugged into the harness and connect the adapter to the outlet panels on your new CD player.
- Plug the Saturn's cable into the cable adapter of the new CD player.
- Gently slide the CD player into the slot where the cassette player was.
- Screw in the two bolts to connect it.
- Plug all dashboard wiring into the back of the central dashboard.
- Replace the center console.
- Replace the negative battery and tighten the cable's clamp. Use a wrench to tighten it to the post. Replace the pin connectors that were on the side of the panel.