Previous Article

How to Get Tickets to a Shuttle Launch

Next Article

How to Launch a New Product

How to Launch a Motorboat From a Trailer

Launching your motorboat from a trailer may take a bit of practice in the beginning, but soon you will be launching your boat like a pro. You may do some steps before you back your boat to the actual launch, to avoid holding up other boaters who want to use the launch.


  1. Raise your outboard up; you want to make sure this will not hit the bottom when you are launching.

  2. Remove the tie downs and be sure the winch is attached correctly.

  3. Put your drain plug in. Be sure it is securely in place, to avoid having your boat take on water once it is launched.

  4. Attach your line to the boat. This way, you can keep your boat from floating off once it is in the water.

  5. Have someone near the edge of the launch, to help guide while you are backing up, if you have someone with you. If you have two people with you, have the other person in the boat as you launch.

  6. You can now drive to the ramp and back the boat and trailer down the ramp. Be sure to keep your wheels out of the water, this is where having someone guiding you can be useful.

  7. Put your vehicle in park and use the parking brake. Double check that the vehicle is in park, before you get out.

  8. Lower the boat motor. Start it and be sure water is passing through the cooling system as it should.

  9. Release the winch and remove the winch line from the boat.

  10. Give the boat a push and it should launch easily.

  11. Move your vehicle and trailer away from the launch and into a parking area as soon as your boat is launched, so that the next boat can launch.